In this section we consider the procedure of firmware and unlock USB 3G modem ZTE MF626 MF627 (MF628 not yet met). The following discussion focuses principally for modems MF626 MF627. MF628 modem software listed below may inappropriate due to differences in the chip used in the modem (MF626 MF627 - MSM6246 unlike MF628 - MSM6280), for more information http://depositfiles.com/files/hjp423f65 . Consider processes flash and unlock data modems. In this case, two processes take place using a single togozhe software. This is due to the fact that a special tool to unlock I have not found, and to do it on their own do not see the point, as the program firmware eliminates binding to cellular service.
The software required for the firmware to be on the following link: http://depositfiles.com/files/b4sbuv67w
Proceed directly to consideration of the firmware :-1. Before you start the firmware, make sure that your USB modem ZTE MF626 or ZTE MF627.
2. Run the program MF626GlobePatch_V1.3.exe. After starting the program the following window appears:
3. After successfully applying the patch proceed directly to the flashing device. For these purposes, we use MF626UpdateTool_GLOBE_PHV1.2.exe. After starting the program you will see the interface to download the inactive button is activated after detection device. Next, click on the download button and the process of the firmware will automatically. It is recommended that the firmware of modems on a computer running Windows XP sp2 or sp3.Automatic flashing mode is divided into several stages:
- Check the equipment before starting the firmware;
- Preservation nv backup parameters (basic nastorykmi modem) to a file: \ Channel1;
- Translation modem Download Mode;
- Download new software to the modem;
- Restoration nv modem parameters.
4. After successful flashing srazuzhe modem can be used. If as a result of the firmware software crashes due to unforeseen circumstances (shutdown holy, viruses, incorrect configuration of your computer, and others.) Then your modem probably die (cease to work properly). This is likely to happen after the modem as a result of firmware will be transferred to the Download Mode to download the new firmware and at this point the equipment will fail and your modem and oostanetsya in Download Mode. This modem is not dead in the literal sense of the word he just nazhoditsya in a particular mode. On how to bring it out of this mode will be discussed in the next section of this site.